Free DMX rap lyrics cross stitch pattern/chart

DMXFINISHED1

This is the last little project I’ve been working on.

It’s a gift for a friend that happens to like DMX, the author of the quote in the picture. Of course, I never thought I would ever stitch a brass knuckle, but there it is. I added the roses just because. They make the whole design funnier (roses are pretty gangsta right?)!!

The original roses were from a free pattern I found online that I modified to fit in. But, I cannot find the original anywhere!! I’ll add a picture of it once I find it.

Now, the charts! I added the second one without symbols and more contrasted colours just so it’s easier to see. The colour chart is only attached to the first picture.

DMXchart2DMXchart1

Free Bernard (Day of the Tentacle-Maniac Mansion II) Cross Stitch Pattern/Chart

dott_bernard_sprite_rips_by_jhroberts

Hello!

It’s been a while since I uploaded a new chart! I been wanting to share the pattern for Bernard for a while but I haven’t had much time… again.

This character is from a game called Day of the Tentacle, by LucasArts. It’s the sequel of Maniac Mansion (game that I absolutely adore). I will upload a chart for Hoagie and Laverne in the next couple of days.

By the way Day of the Tentacle is being remastered!!! It’s coming to PC, PS4… in 2016. I’m so happy! After playing the remastered version Grimm Fandango I’m just hoping this one turns out just as good. Big YAY for Tim Schafer! I would love to see more LucasArts games get the remaster treatment… Maybe LOOM and Zak McKracken. Or the two Indiana Jones!

The chart is based on a picture (above) made by jhroberts on DeviantArt.

Bernard1
Head 1 and 2
Bernard2
Body 1 and 2
Bernard3
Head 3 and 4
Bernard4
Body 3 and 4

Enjoy!

Cross stitch tree WIP (link to free chart)

treewip

Hello! Just like in I mentioned in the previous post, I’ve been quite busy lately and I have no time to do much crocheting or cross stitching. Not a good thing.

This is the little tree I’ve been working on for a while now, it’s still a WIP so I’m hoping to finish it up soon (before new year’s hopefully…)

I came across the chart on Pinterest but the website link on it doesn’t work any longer. Casamiainitalia.com is down until the end of January according to the message on the site. This is a picture of the finished item, from Pinterest also.

It’s coming out way bigger than I expected (I feel like I should know enough about sizing by now…). The tree alone is around 5 1/2 inches long! I used 28 ct evenweave. Since there is no colour chart available with the pattern, I’ll share the three colours I used as well: DMC 3348 as green, DMC 945 as “peach” colour (I don’t know if they are flowers or fruits so I made them as peaches) and DMC 817 for the red details.

I still have a little bit to go but hopefully, it will turn out nice one finished!

Knit-like Crochet pillow case free pattern. Colour blocking!

PILLOW7

Hello! I’m quite happy to be writing this entry because that means my pillow case is done! I just finished sewing the zipper and it’s good to go.

Now, I did write the pattern for the begging part but I didn’t write the exact number of stitches I needed… Silly me. But it doesn’t really matter as it is better to measure the begging rows with whatever pillow size you have. This pattern is very similar to the Pouch pattern I wrote a couple months ago, so if you’ve made one already, you’re good to go.

Let’s begin!

The stitch used here is a HDC worked in the loop behind it. There’s a really nice tutorial here.

Yarn: This stitch likes to eat a LOT of yarn. I used 7 balls of Loops and Threads Woolike Chunky. 5 in Beige and 2 in Mauve. The yarn is a blend of acrylic and nylon so it splits in every other stitch… but it’s worth it. It looks really nice. I used a 6.5mm hook

MY “ROWS” ONLY COUNT HALVES. NOT THE ENTIRE “CIRCLE”. JUST LIKE IF YOU WERE WORKING FLAT AND TURNING.

Pattern: Start by chaining as many stitches as you need for you pillow size. This is how my case compares to the pillow: PILLOW3

Row 1: 1 SC in second chain from hook in back loop only. SC to the end, turn. (At this point you could be doing HDC already, but I liked the look of two rows of SC better.).

Row 2: 2 SC in what is now the back of the chain. SC to the end and add 1 more SC to the last stitch.

Row 3: Keep working in the circle but this time start with the first row of HDC.

Row 4: Keep working in the circle do not join. It’s all one circle!

Row 5: When you get to the first HDC of the previous row instead of working under the regular V stitch, start working the HDC on the third loop created behind it. It will be on the inside part. (check out the tutorial above if you’re not sure of what loop it is).

Row 6 to end: Keep working the HDC 3rd loop around until you reach the size you want.

For colour change: Make the colour block band as wide as you want, my pillow case size is: 20 by 18 inches (51 by 46 cm) total. The mauve band alone is 6 inches (about 15.5 cm)

Finishing: I had to make a bit of an invention and close the sides a little bit because my zipper was too small. The only size they had in the colour that exactly matched the yarn was only 35cm long, so I had to SL ST the corners. When I reached the right size for my pillow I started to SL ST at the corner working the 3rd loop of the HDC and the 3rd loop of the HDC in front (for about 6 stitches). Then, I continued to SC in the 3rd loop of the HDC until I I had 6 stitches left and SL ST just like the other corner. Finish off.

Tuck in all the tails and sew in the zipper. It can be finished off with buttons a flap or anything you want too, but, as I was going for the “minimal” look I didn’t add any details. Just a zipper that blended in.

NOTE: Keep measuring the pillow as you go!! Make sure everything fits!! I tried to get the best light for the pictures, I hope you guys can use them as reference. Instead of a pillow, you can just use stuffing, make the case any size you want and SL ST the top closed. There are so many options!!

pillow5
Look from the top with the zipper in. Bottom of the pillow with starting SC chain.
PILLOW4
Pillow in.
PILLOW2
Colour change on the side.

Free Super Mario (Tanooki tail) Cross Stitch Pattern / Chart.

Tanooki MarioI love Mario in his little costumes. In this pattern he only has the Tanooki (Raccoon) tail and ears. I believe the original full raccoon suit comes from Super Mario Bros. 3. It has always been one of my favourites next to the frog Mario.

I haven’t made a colour chart for this pattern but it’s really simple, DMC 310 for the black, any bright red, any light peachy colour and a little bit of brown. It only takes 4 colours!

Free “Ask Me About LOOM” cross stitch pattern / chart

LOOMCHARTHave you guys ever played Loom? I only payed it a couple times back in the day and never finished it because I thought it was boring… But I picked it up again a couple years ago and finished the whole thing without any walkthroughs. I was quite happy about it. The game happens to be more interesting than what I remembered and also, much less spookier.

Anyone that has ever played Monkey Island probably remembers a creepy little pirate from the Scumm Bar that had a badge with “Ask me about LOOM” on it. At the time I had no idea what LOOM was, I just thought it was some kind of joke and not a real game.

*In Monkey Island 3 there’s another “Ask me about…” but this time is referring to Grim Fandango. Even Many Calavera is in it! (There’s also a very recent remastered Grim Fandango game for PS4, PC and iOS. Totally worth getting, it’s an amazing game.)

Anyways, I always wanted a poster with “Ask me about…” on it. This kind of stuff can be tricky to find, so why not make it? The in game badge has white letters on a blue background, but it was harder to see on the chart so I just inverted the colours. This one would look good stitched on blue linen. I’ll see if I can find the right shade and I’ll get to it.

Enjoy.

This creepy Cobb, just in case you were curious.
This is Cobb, just in case you were curious.

Free Pokemon Center Cross Stitch Pattern / Chart.

PokemonPCCHART

I just finished changing a couple of the colours for this pattern of the 3rd generation (Kanto) Pokemon Center. This is a simplified version of the actual in game building. I didn’t want to end up with a 200 colour chart…

I haven’t done a colour chart for this one because I don’t have the most accurate threads at home and I have no time to go to the store this week. But if anyone is planning on stitching it, I recommend bringing the picture to the store to compare colours. It’s mostly shares of red, blue and grey. Really simple.

I hope you guys like it and If you have any suggestions on what do you want to see next, just leave a comment here or on my Instagram!

Thank you for reading!!

Free Jurassic Park Logo Cross Stitch Pattern / Chart

JurassicParklogosHello,

I just wanted to share a chart I just made for the Jurassic park logo. It’s based on the 1993 Nes game (Ocean), because that’s the year my favourite Jurassic Park movie came out!

This is a big chart so I had to turn it into a PDF. PATTERN HERE: JurassicParkLogo.

I made it based on the picture with a red background but the colours can be easily modified. Another option is the yellow logo, just like the one in the picture above.

The PDFincludes the DMC colours you need, but feel free to chose any other shades of red/yellow.

Happy stitching!!!

Free Sarge (Quake III) cross stitch pattern / chart.

Sarge1

I finally made a new pattern! It’s been a while since I’ve been quite busy but here it is. This is Sarge, a character from a series of games called Quake (a first person shooter). Since my favourite is Quake III Arena, that’s where all the characters will be coming from. I’m planning on making a few more charts with other characters.

The chart is based on a picture made by metalparts in Deviantart.

Don’t forget to check out all her other work, this is Italian for my girlfriend, one of my favourites, very nice illustration and a very cute idea. This is her tumblr Art Blog, her style is amazing, worth checking!!

Feel free to modify the colours on Sarge’s armour to any other colour you like. Here is the pattern:

Sarge1chartSarge2chart